Ok, finally installed the parts. It wasn't to much of a job. You do need to remove the door panel or if you don't want to remove it completed, have a helper hold it. Once the door panel is out of the way, remove the hardware holding it to the inside of the door. You will also need to remove the two nuts on the door jam side. To replace, just fish the new part up through the door and bolt it back into place. The next step is to close the door enough to install the two nuts on the door jamb and you are set. Install the door panel, job is complete. It took me about 30 minutes to do both doors. The first door took about 20 minutes of the 30. Once you have done the first door the second one you can pretty much cruise right through.