interesting, i wonder how they would perform on a non bbk. Also did you notice loss in stopping power, when it got hot i.e constant hard braking
FX50S brake pad removal question?
- Thread starter roadracer516
- Start date
roadracer516
Member
- Location
- Salt Lake City, UT
I would say your results on non BBK would be similar. I honestly only had the stock pads on for 2 or 300 miles. But initial impression is that the initial bite is better with the EBC and they have at least the power of the stock pads. I have not put them through much abuse, but my guess is that they will perform better under extreme conditions. That is my experience with EBC pads in the past on other four and two wheel applications.
thank you
roadracer516
Member
- Location
- Salt Lake City, UT
OK.......here is "proof positive" of the dust reduction using these EBC Redstuff pads. Here are pictures of dust accumulated over 1100 miles of straight use. I just got back from a Vegas road trip and have put 1100 miles on the car since the wheels were last cleaned. I took pictures of the front and the rear before cleaning and after cleaning in very similar light for a good comparison. I am VERY happy with these pads!
1100 miles front before cleaning:
[/IMG]
1100 miles rear before cleaning:
[/IMG]
After cleaning the front wheel:
[/IMG]
After cleaning the rear wheel:
[/IMG]
1100 miles front before cleaning:
1100 miles rear before cleaning:
After cleaning the front wheel:
After cleaning the rear wheel: