20x10 rims allround on 09+ fx?

D

dgds88t

Member
Location
Montreal Canada
Hello everyone, I am new to forum and I currently drive a 08 g35xs. I am looking to purchase a fx35 in the near future. Anyone know if 20x10 (all 4 corners) wheels will fit the new fx35? Anyone has 10" width on their fx? Thanks guys.
 
Thanks for advise. Actually I am looking at the bremmer kraft BR05 from tirerack.


I think the offerset is not a problem, but the problem is: are they gonna stick out of the wheel arch?
 
i had 10.5' all around on the 1st generation and sat right under the plastic arch, but not sticking out, i think the 2nd generation should have more room
 
Dracula said:
i had 10.5' all around on the 1st generation and sat right under the plastic arch, but not sticking out, i think the 2nd generation should have more room
Click to expand...

Thanks! But from what i heard the 2nd gene have less arch clearance. I could be very wrong tho. Anyone else have 10" width wheels on their 09+ fx? Or 8-9" with spacers perhaps :wink (2):?
 
I'm getting a set of rennen r8 concave wheels 20x10 all the way around on a 2011. The salesguy at rennen said it's ok and so did my performance guy here at where I work. I believe the offset is going to be 35+ or 40+ mm offset with a 3.5 inch lip in the rear and 2 inch lip in the front.He is going to get back to me and let me know for sure on the offset. (interestingly enough the guy at modulare wheels said no manufacture can put a lip larger than 2" on a concave rear wheel on the second gen fx)
 
I believe someone on this forum (Sydney?) is running 20 x 10, 40 mm offset on his 2009 FX. It looks nice and flush. So much so that i'm almost considering going to that wheel size myself, and I have a '10 FX50 with the 21" Enkei's!
 
defjamz said:
I believe someone on this forum (Sydney?) is running 20 x 10, 40 mm offset on his 2009 FX. It looks nice and flush. So much so that i'm almost considering going to that wheel size myself, and I have a '10 FX50 with the 21" Enkei's!
Click to expand...

40mm is not flush. about +25-30 is right around flush, or the stock 20"s with 25mm spcers
 
I have 20-10's on my 09 FX35 with a 45 offset and they are pretty flush even with HANKOOK 295-45/20's on them. Check out my pictures on my profile. Hope this helps you out.
 
You must log in or register to reply here.
Back
Top